Search our store

Orbeco-Hach Cross Reference List

Echotherm IC25XT Digital Programmable Chilling/Heating Dry Bath

<< Previous in Dri-Baths

Next in Dri-Baths >>

List Price: $1,750.00

Clarkson Price: $1,487.50

You Save: $262.50 (15 %)

Clarkson Catalog Number: IC25XT

Manufacturer: Torrey Pines Scientific

Supplier Catalog Number: IC25XT

Quantity:

Add to a new shopping list

Email this page to a friend

Torrey Pines IC25, Torrey Pines IC25XT, Torrey Pines IC25XR

Clarkson IC25XT
Echotherm IC25XT Digital Programmable Chilling/Heating Dry Bath
Torrey Pines Scientific IC25XT

The completely solid-state EchoTherm IC25 Digital, Programmable, Electronic Chilling/Heating Dry Bath is versatile, reliable and easy to use. The IC25 has simple digital controls and a two-line alphanumeric display that is backlit for easy reading. The display shows both the target and actual temperatures. Additionally, it displays the timer and all programming functions.

The chilling/heating surface is a 2.875” (7.3 cm) x 4.375” (11.1 cm) aluminum plate that is very flat for optimal contact with the sample. When unloaded, the plate will go below 0°C in under two minutes. It will heat to 37°C in even less time. Generally, the unloaded surface will decrease temperature at about 3°C/minute. Heating rates on the unloaded plate are usually about 5°C/minute. The blocks sold as accessories range in size and mass depending upon the samples used. The unit can drive a block for 1.5 ml centrifuge tubes from ambient temperature to 4°C in less than 30 minutes. When used with an accessory cover these blocks can be driven below 0°C. Temperature gradients from the center to the edge of any accessory block will be less than 0.5°C at any temperature.

Optional Models

XT Model: Chilling range expanded to -20°C without sample block. Recommended for holding samples steady at low temperatures without cycling.
XR Model: dual Peltier modules for extra power, faster speeds between temperatures and expanded heating to 110°C without sample block. Strongly recommended for larger loads and for cycling temperatures up and down.

Features

5-program memory
Energy-efficient Peltier design
Digital control to 1°C from -20°C to 110°C without sample block
Control at ambient
Built-in data logger
Count down timer (up to 30 days) with audible alarm and user settable Auto-Off
RS232 I/O port for data collection
Electronic calibration. Factory set, but user can set to any local standard
Small, compact size. Uses very little bench space
12-volt DC operation. External power supply provided
12-month warranty
UL, CSA and CE compliant

Applications Include

Unattended restriction digestions or ligations at elevated temperatures then reducing temperature to 4°C automatically to reduce non-specific nuclease digestion of target DNA
Automatically stopping reactions by having the unit reduce sample temperature after a specific reaction time
Producing denatured probes or single stranded DNA molecules by heating to 90°C to 95°C for a given time and rapidly reducing temperature to 4°C to prevent renaturation
Automatic temperature profiles to grow bacteria at 37°C, then increasing temperature to induce events, and then lowering temperature to 4°C to prevent degradation
Maintaining 14°C for ligation reactions
Enzyme reactions and deactivations
Maintaining 17°C for storing oocytes
Storing reagents at 4C in 15, 50, 250, and 500ml centrifuge tubes
Storing samples at ice bucket temperatures without the mess
Incubating samples at 37°C in 96-well assay plates or in aluminum blocks holding 0.2, 0.5 and 1.5 ml centrifuge tubes, vials, and test tubes
Storing enzyme or DNA libraries at your workstation
Freezing and storing most any sample at your workstation

Specifications
Temperature
Range	-10°C to 100°C (IC25) -20C to 100C (IC25XT) -10C to 110C (IC25XR) (minimum temperature possible is 30°C below ambient without sample block)
Readability	1°C
Accuracy	±1°C
Stability	±1°C
Sensor Type	Platinum RTD
Controller Type	PID
Uniformity	±0.3°C
Timer
Range	00:01 to 30 days
Readability	1 second
Audible Alarm	Yes, alarm sounds for 1 minute. Timer counts up until UP or DOWN key is touched
Programming
Programs Stored	5
Individual Program Capacity	10 Steps
Program Repeat	1–99 times
Memory Backup	Yes, in CMOS
Data Logger
Sample times	1 sec, 1 min or 5 minutes per data point
Capability	7825 data points
Electrical
Heater/Chiller	Peltier, 50 watts (IC25) 100 watts (IC25XT and IC25XR)
Operating Voltages	From 90 to 265 volts AC into universal power supply. 12 VDC output to chiller/heater module.
Power Consumption	50 watts (IC25), 100 watts (IC25XT and IC25XR) maximum
Power Switch	Yes
Chilling/Heating Module Dimensions WXDXH	6.5X8.75X3.5in (16.5X22.23X8.9cm)
Power Supply Dimensions LXHXW	6.5X3.2X2.2in (16.5X8.1X2.2cm)
Weight (power supply & chiller/heater module)	8 lbs (3.6 kg)

Catalog Number	Description	Voltage
IC25	Programmable Chill/Heat Plate w/power supply	90-265V
IC25XT *	Programmable Chill/Heat Plate as above, extended chilling to -20C	90-265V
IC25XR	Programmable Chill/Heat Plate as above, extra power & heating range	90-265V

Additional Information
Price List

Product Reviews

(0 Ratings, 0 Reviews)