| | |
|
| |
| | |
|
|
Orbeco pH Meters and Testers
Series 200 pH, Conductivity and
Dissolved Oxygen Meters
Model pH 200 pH/mV/Temp Meter
- pH, ORP and Temperature Measurement
- 1, 2 and 3 Point Calibration
- Automatic Buffer Recognition
- Automatic Temperature Compensation (ATC)
- Auto Hold Function
-
Datalogging with Time/Date Stamp (20 Data Sets)
-
Low Battery and Battery Change Indicator
-
Auto Sensor Evaluation
-
Shock Absorbing Protective Rubber Housing
-
Waterproof
-
Battery Life – up to 15,000 hrs
Specifications
| pH: |
0.00 to 14.00 |
| Accuracy: |
± 0.01 pH (at nominal temperature, unit ± 1 digit) |
| Temperature: |
-10.0 to +110.0 °C
14.0 to 230.0 ° F |
| Accuracy: |
±0.2 °C (-0..50 °C), otherwise ± 0.4 °C |
| mV: |
-1999 to +2000 mV |
| Relative mV: |
-1792 to +2206 Rel mV |
| Accuracy: |
± 0.1 % FS (mV or Rel mV) |
| Sensor connections: |
DIN 19262 and two 4 mm banana
sockets "Temp” and "Ref” |
| Input resistance: |
>1012 Ohm (typ.) |
| Input current: |
<1 pA |
| Nominal temperature: |
25 °C |
| Operating temperature: |
0 to +50 °C |
| Storage temperature: |
-20 to +70 °C |
| Power supply: |
4 x AA batteries (1.5V),
Battery life up to 15,000 hrs |
| Power consumption: |
0.2 mA |
| Auto-Off function: |
0 - 120 minutes |
| Calibration: |
1, 2 or 3 point calibration with auto buffer recognition |
Ordering Information
|
P/N
|
Description
|
|
L721200
|
pH 200, instrument only, includes batteries,
instruction manual, lanyard
|
|
L721220
|
pH 200 (SET 1) complete set with instrument,
batteries, pH/temp. plastic-electrode type 230,
pH-buffer-set (pH 4.00/7.00/10.00), carrying case
|
|
L721221
|
pH 200 (SET 2) as SET1, but with pH/temp. plastic-
electrode type 225, and temperature sensor Pt 1000
|
|
L721225
|
pH-electrode plastic/gel-type 225
|
|
L721230
|
pH/temp.-electrode type 230, plastic/gel/tem-
perature NTC30kOhm
|
|
L721235
|
pH-electrode glass/gel-type 235
|
|
L721240
|
Redox-electrode plastic-type 240
|
|
L721245
|
Temperature sensor
|
|
L418609
|
KCl-solution, 3 molar saturated with AgCl,
100 ml
|
|
L721250
|
pH buffer-set 4.00/7.00/10.00 (25°C)
|
|
L721252
|
pH buffer 4.00 (25°C) 1 litre
|
|
L721254
|
pH buffer 7.00 (25°C) 1 litre
|
|
L721256
|
pH buffer 10.00 (25°C) 1 litre
|
|
L721260
|
Adapter cable DIN19262 - BNC
|
|
L721265
|
Adapter cable DIN19262 S7 plug-head
|
Model COND 200 - Conductivity Meter
- Conductivity, Total Dissolved Solids (TDS), Salinity and Temperature Measurement
- 4-Electrode Conductivity Cell
- Automatic Temperature Compensation (ATC)
- Storage of Min/Max Measurement
- Linear and Non-Linear Temperature Compensation
- Datalogging with Time/Date Stamp (20 Data Sets)
- Auto Calibration with Standard Solutions
- Low Battery and Battery Change Indicator
- Shock Absorbing Protective Rubber Housing
- Waterproof
- Battery Life – up to 3,000 hrs
Specifications
| Conductivity: |
0.0 to 200.0 µgS/cm
0 to 2000 µgS/cm
0.00 to 20.00 mS/cm
0.0 to 200.0 mS/cm |
| Resistance: |
0.005 to 100.0 kOhm*cm |
| TDS: |
0 to 1999 mg/l |
| Salinity: |
0.0 to 70.0 g/kg |
| Accuracy: |
± 0.5 % v. MW ± 0.5 % FS (± 3 digits) |
| Temperature: |
-5.0 to 100.0 °C
23.0 to 212 ° F |
| Accuracy: |
±0.3K |
| Cell constant: |
0.50 ± 0.10 cm-1 |
| Temperature compensation: |
selectable:
- linear , 0.3 to 3.0 %/K
- non-linear
- no compensation |
| Reference temperature: |
20 °C and 25 °C |
| Nominal temperature: |
25 °C |
| Operating temperature: |
Instrument: 0 to + 50 °C
Measuring cell: -5 to 80 °C (up to 100 °C
for short periods) |
| Power supply: |
4 x AA batteries (1.5V),
Battery life up to 3000 hrs |
| Power consumption: |
ca. 3 mA |
| Auto-Off function: |
0 - 120 minutes |
| Measuring cell: |
4-electrode conductivity cell with integrated temperature-sensor (NTC10kOhm). |
Ordering Information
| P/N |
Description
|
| L722220 |
COND 200 complete set including instrument, batteries, 4-electrode conductivity cell and carrying case |
| L722225 |
4-Electrode Conductivity Cell |
| L722250 |
Calibration solution 1413µgS/cm |
Model DO 200 - Dissolved Oxygen Meter
- Oxygen Concentration, Saturation, Partial Pressure and
Temperature Measurement
- Self-Polarizing Galvanic DO Probe – no warm up time
- Air Calibration
- Auto Salinity Correction
- Air Pressure Measurement and Auto Correction
Auto Hold Function
- Low Battery and Battery Change Indicator
- Auto Sensor Evaluation
- Accessories for Depth Measurement
Shock Absorbing Protective Rubber Housing
- Waterproof
- Battery Life – up to 12,000 hrs
Specifications
| O2 concentration: |
0.00 to 25.00 mg/L, 0.0 to 70.0 mg/L |
| O2 partial pressure: |
0.0 to 570.0 hPa, 0 to 1200 hPa |
| Accuracy: |
± 1.5% ± 0.2 mg/L (0 to 25 mg/L) ± 2.5% ± 0.3 mg/L (25 to 70 mg/L) ±1Digit |
| Temperature: |
-5.0 to + 50.0 °C 23.0 to 122.0 ° F |
| Accuracy: |
± 0.1 °C |
| Abs. air pressure: |
500..1100 hPa |
| Accuracy: |
± 0.5% full scale |
| Operating temperature: |
0 to +50 °C |
| Power supply: |
4 x AA batteries (1.5V),
Battery life up to 12,000 hrs |
| Power consumption: |
max. 0.25 mA |
| Dimensions: |
175 x 140 x 45 mm (L x W x H) |
| Weight: |
approx. 580 g |
| Electrode: |
Self-polarizing galvanic electrode with integrated NTC sensor |
Ordering Information
| P/N |
Description
|
| L723220 |
DO 200 complete set with instrument, batteries, oxygen sensor (1.5 m cable), electrolyte (KOH), 3 interchangeable membrane heads, carrying case |
| L723221 |
DO 200 complete set as above, but with oxygen sensor (10 m cable) |
| L723222 |
DO 200 complete set as above, but with oxygen sensor (30 m cable) |
| L723201 |
Oxygen sensor, 1.5 m cable for DO 200 |
| L723210 |
Oxygen sensor, 10 m cable for DO 200 |
| L723230 |
Oxygen sensor, 30 m cable for DO 200 |
| L723250 |
Oxygen Sensor Service Kit with 3 interchange- able membrane heads, 100 ml plastic bottle KOH-solution 3 mol/l |
| L723260 |
Protective cap for depth measurement |
08/24/16
I activated the e-mail link today.
mlv |
|